AMI UCF204NP Mounted Units & Inserts

T min.:-40 °C; Z:21.7 mm; C0:15.2 kN; N2:37 mm; Designation of housing:T207N-; H:102 mm; s1:21.45 mm; N1:16 mm; A5:25.4 mm; L:129 mm;

G1 - Heat Generation Factor (Roller-Raceway)5:38.8; Series:47600; Y - ISO Factor4:1.48; C - Cup Width:1.0313 in; Da - Cup Frontface Backing Diameter:5.16 in; K - Factor2:1.44; e - ISO Factor3:0.4; G2 - Heat Generation Factor (Rib-Roller End):27.8; Cup Part Number:47620-B; Design Units:Imperial;

Design Units:Imperial; C0 - Static Radial Rating:174000 lbf; Cage Type:Stamped Steel; db - Cone Backface Backing Diameter:5 in; G2 - Heat Generation Factor (Rib-Roller End):40.9; Cg - Geometry Factor:0.116; G1 - Heat Generation Factor (Roller-Raceway):298.2; Ab - Cage-Cone Frontface Clearance:0.15 i

S:25.4 mm; J:216 mm; T min.:-20 °C; Z:82.4 mm; N:21mm; d:63.5 mm; Weight:5.84 kg; Designation of bearing:UC213-40G2L3; Dz:132 mm; C0:40 kN;

Piston Length of Travel:23 mm; D:72.00 mm; Piston Area:64200 mm²; A:13 mm; Assembly Weight:96.000 Kg; E:671 mm; C:725.0 mm; E1:582 mm; Threads B:Tr580x6;

Ca90 - Dynamic Thrust Rating (90 million revolutions)7:69000 lbf; da - Cone Frontface Backing Diameter:10.83 in; Aa - Cage-Cone Backface Clearance:0.28 in; db - Cone Backface Backing Diameter:11.18 in; Cg - Geometry Factor:0.175; G2 - Heat Generation Factor (Rib-Roller End):173; a - Effective Center

r - Cup Backface To Clear Radius1:0.050 in; Db - Cup Backface Backing Diameter:4.25 in; Cg - Geometry Factor:0.0827; e - ISO Factor2:0.49; Cup Part Number:65501; Da - Cup Frontface Backing Diameter:4.72 in; Series:65000; Y - ISO Factor3:1.23; Design Units:Imperial; D:5 in;

rs min:1.5 mm; Da max:117 mm; Max operating temperature, Tmax:120 °C; Brand:NTN; Fatigue limit load, Cu:2 kN; Radial clearance class:CM; Characteristic cage frequency, FTF:0.41 Hz; d:70 mm; D:125 mm; Mass:1.07 kg;

J:242 mm; A:94 mm; d:100 mm; Designation of bearing:UC320G2; C0:140 kN; T max.:100 °C; Designation of housing:F320-; A1:32 mm; S:42 mm; T min.:-20 °C;

da min:147 mm; db min:142 mm; ra max:3 mm; Da max:263 mm; b:18.9 mm; d:130 mm; Number of lubrication holes:3; d2:164.7 mm; k:9 mm; Fatigue limit load, Cu:113 kN;

A1:31 mm; Dz:80 mm; H1:19 mm; S:17.5 mm; H2:94 mm; Weight:1.73 kg; B:42.9 mm; T min.:-20 °C; L1:54 mm; H:47.6 mm;

Shaft Size d:1 in; Inside Ring Width B:34.92 mm; Adjustment Screw Bore N:48.00 mm; Static Load Rating:1750 lbf; Total Height H:92.1 mm; Opening Width N1:15.9 mm; Dimension L2:12.70 mm; Slot Length L3:57.2 mm; Pitch Height H1:76.2 mm; Housing Style:Take-Up;

J:97 mm; T max.:100 °C; H:33.3 mm; B:31 mm; L1:40 mm; Weight:0.58 kg; C0:6.65 kN; s1:15.5 mm; C:12.8 kN; Recommended tightening torque for set screw:3.7 Nm;

L:150 mm; L1:32 mm; B:33.4 mm; Weight:3.79 kg; C:52.5 kN; B1:49.3 mm; H2:140 mm; H:69.9 mm; N:M16; A1:42 mm;

A:33.5 mm; G:R1/8"; d:30 mm; e:20 mm; L:108 mm; Recommended tightening torque for set screw:11.5 Nm; N:11,5mm; C0:11.2 kN; C:19.5 kN; J:82.5 mm;